gitlab повільний під час запуску на піддомен nginx

Я намагаюся запустити gitlab на субдомен. Я встановив останню версію gitlab за допомогою програми встановлення omnibus на своєму vserver (працює з Ubuntu 14.04.1) і відключив пакет nginx і налаштував розв’язаний nginx з розміщеною тут конфігурацією. Як встановити піддомен на nginx?

/ etc / nginx / sites-availible / gitlab

upstream gitlab {
    server unix:/home/git/gitlab/tmp/sockets/gitlab.socket;
}

server {
listen 80 default_server;         # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea
server_name git.domain.com;     # e.g., server_name source.example.com;
server_tokens off;     # don't show the version number, a security best practice
root /home/git/gitlab/public;
client_max_body_size 500m;

# individual nginx logs for this gitlab vhost
access_log  /var/log/nginx/gitlab_access.log;
error_log   /var/log/nginx/gitlab_error.log;

location / {
  # serve static files from defined root folder;.
  # @gitlab is a named location for the upstream fallback, see below
  try_files $uri $uri/index.html $uri.html @gitlab;
}

# if a file, which is not found in the root folder is requested,
# then the proxy pass the request to the upsteam (gitlab unicorn)
location @gitlab {
  proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694
  proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694
  proxy_redirect     off;

  proxy_set_header   X-Forwarded-Proto $scheme;
  proxy_set_header   Host              $http_host;
  proxy_set_header   X-Real-IP         $remote_addr;

  proxy_pass http://gitlab;
}

Я можу зайти на сторінку, але для завантаження потрібні 30 і більше років. Це не забирає так багато часу, коли я використовую вбудований сервер nginx, тому я не думаю, що це проблема пам'яті (і freeговорить мені, що є 1,4 ГБ)

Журнал помилок повідомляє мені щось подібне:

/var/log/nginx/gitlab_error.log

server: git.mydomain.de, request: "GET /assets/application-c4186ca579dd09b3e48eaf1b5a3e4434.js HTTP/1.1", upstream: "http://unix:/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket:/assets/application-c4186ca579dd09b3e48eaf1b5a3e4434.js"

Дуже дякую за допомогу!

Оновлення : оновлення до Gitlab 8.x вирішило цю проблему для мене

Оригінальний відповідь :

У мене була ця сама проблема і вирішено її, безпосередньо скопіювавши створений конфігурацію nginx з установки gitlab до моєї каталогу конфігурації nginx.

Я знайшов свій gitlab nginx config у: /var/opt/gitlab/nginx/conf/gitlab-http.conf

Вставте його тут для нащадків:

# This file is managed by gitlab-ctl. Manual changes will be
# erased! To change the contents below, edit /etc/gitlab/gitlab.rb
# and run `sudo gitlab-ctl reconfigure`.

## GitLab
## Contributors: randx, yin8086, sashkab, orkoden, axilleas, bbodenmiller
##
## Modified from https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/nginx/gitlab-ssl & https://gitlab.com/gitlab-org/gitlab-ce/blob/master/lib/support/nginx/gitlab
##
## Lines starting with two hashes (##) are comments with information.
## Lines starting with one hash (#) are configuration parameters that can be uncommented.
##
##################################
##        CHUNKED TRANSFER      ##
##################################
##
## It is a known issue that Git-over-HTTP requires chunked transfer encoding [0]
## which is not supported by Nginx < 1.3.9 [1]. As a result, pushing a large object
## with Git (i.e. a single large file) can lead to a 411 error. In theory you can get
## around this by tweaking this configuration file and either:
## - installing an old version of Nginx with the chunkin module [2] compiled in, or
## - using a newer version of Nginx.
##
## At the time of writing we do not know if either of these theoretical solutions works.
## As a workaround users can use Git over SSH to push large files.
##
## [0] https://git.kernel.org/cgit/git/git.git/tree/Documentation/technical/http-protocol.txt#n99
## [1] https://github.com/agentzh/chunkin-nginx-module#status
## [2] https://github.com/agentzh/chunkin-nginx-module
##
###################################
##         configuration         ##
###################################

upstream gitlab {
  server unix:/var/opt/gitlab/gitlab-rails/sockets/gitlab.socket fail_timeout=0;
}


server {
  listen *:80;
  server_name git.mydomain.com;
  server_tokens off; ## Don't show the nginx version number, a security best practice
  root /opt/gitlab/embedded/service/gitlab-rails/public;

  ## Increase this if you want to upload large attachments
  ## Or if you want to accept large git objects over http
  client_max_body_size 250m;


  ## Individual nginx logs for this GitLab vhost
  access_log  /var/log/gitlab/nginx/gitlab_access.log;
  error_log   /var/log/gitlab/nginx/gitlab_error.log;

  location / {
    ## Serve static files from defined root folder.
    ## @gitlab is a named location for the upstream fallback, see below.
    try_files $uri $uri/index.html $uri.html @gitlab;
  }

  location /uploads/ {
    ## If you use HTTPS make sure you disable gzip compression
    ## to be safe against BREACH attack.
    gzip off;

    ## https://github.com/gitlabhq/gitlabhq/issues/694
    ## Some requests take more than 30 seconds.
    proxy_read_timeout      300;
    proxy_connect_timeout   300;
    proxy_redirect          off;

    proxy_set_header    Host                $http_host;
    proxy_set_header    X-Real-IP           $remote_addr;
    proxy_set_header    X-Forwarded-Ssl     on;
    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
    proxy_set_header    X-Forwarded-Proto   $scheme;
    proxy_set_header    X-Frame-Options     SAMEORIGIN;

    proxy_pass http://gitlab;
  }

  ## If a file, which is not found in the root folder is requested,
  ## then the proxy passes the request to the upsteam (gitlab unicorn).
  location @gitlab {
    ## If you use HTTPS make sure you disable gzip compression
    ## to be safe against BREACH attack.


    ## https://github.com/gitlabhq/gitlabhq/issues/694
    ## Some requests take more than 30 seconds.
    proxy_read_timeout      300;
    proxy_connect_timeout   300;
    proxy_redirect          off;

    proxy_set_header    Host                $http_host;
    proxy_set_header    X-Real-IP           $remote_addr;
    proxy_set_header    X-Forwarded-For     $proxy_add_x_forwarded_for;
    proxy_set_header    X-Forwarded-Proto   $scheme;
    proxy_set_header    X-Frame-Options     SAMEORIGIN;

    proxy_pass http://gitlab;
  }

  ## Enable gzip compression as per rails guide:
  ## http://guides.rubyonrails.org/asset_pipeline.html#gzip-compression
  ## WARNING: If you are using relative urls remove the block below
  ## See config/application.rb under "Relative url support" for the list of
  ## other files that need to be changed for relative url support
  location ~ ^/(assets)/ {
    root /opt/gitlab/embedded/service/gitlab-rails/public;
    gzip_static on; # to serve pre-gzipped version
    expires max;
    add_header Cache-Control public;
  }


  error_page 502 /502.html;


}